Unclasp your watch and place the thumbtack in the top spoke of the clasp. A small spring bar will pop out.
Gently place your Rolex onto a flat surface (such as a table) face down.
Free Powerpoint To Video
Download Videos To Your Desktop & Convert To Any Format – All Free!
Use the Bergeon 6825 to gently twist the backing of the Rolex (much like a monkey wrench). Once it is loosened, you can unscrew the backing yourself.
Gently press the release button (about 2 to 3 cm from the left of the watch dial) to remove the dial with your thumbtack.
Use your thumbtack to remove the top of the backing (it looks like the top of a spool) after you’ve removed the dial.
Turn the watch over in your hands, and the face should fall out.
Gently begin to press against the glass interior with a piece of scotch tape. This will pick up any dust particles that have become trapped on the inside.
Piece your watch back together once satisfied that your watch is clean on the interior. Place the face inside the watch.
Gently place the watch face down onto your table. Put the dial back into place. It may require a bit of gentle jiggling to get it back into its spot.
Place the backing spool into place and then screw the dial in.
Use your thumbtack to hit the release button to lock your dial into place. Pull it and press it to make sure it’s properly locked in.
Put your backing on and screw it back into place. Use your Bergeon to screw it tightly.
Put the spring bar back into its position and slide it into the clasp. This will take some adjusting. Use a gem cloth to wipe the surface of your watch, and it should now be clean.